The F.A.S.T metallographic laboratory is equiped to prepare & analyze samples of various alloys as well as analysis for combined carbon content, carbon distribution, quality control and part failure, etc. In addition, a final report will be issued with each analysis upon request.

Buehler cut-off saw : Used to section parts up to 2" to 3" in diameter. with automtic cooling solution.

Macro-hardness tester : Provides the capabilities to use 60, 100 or 150 Kg load w/ ball or brale penitrator.

Micro-hardness tester : Provides the capabilities to determine actual particle hardness in P/M compacts as well as, determining many different microstructural phases.

Unimet II Metallograph: Optical capabilities from 50 to 2000 x magnifications (dry). Equiped with automatic exposure meter for color photography.

Olympus Metallograph: Optical capabilities from 100 to 2000X magnifications (wet), with video monitor for additional viewing capacity. Often used for teaching.

Balance : used for determining density measurements in P/M compacts.

Rough & fine grinding equipment : The grinding grits used in this process range from 120 to 1,200 depending on the material to be processed.

Rough & fine polishing equipment : The methods used by FAST, Inc. provide a finished sample with good edge retention, true pore structure and a clear, crisp microstructure with no disturbed metal.

©2001 F.A.S.T., Inc.